Our Products
Booties and Shoecovers
Booties
Our "sock" style booties are fabricated from the highest quality Polyvinyl Chloride (PVC), Polyurethane and Polyethylene available and are electronically heat sealed in one continuous seam to provide maximum protection. The thickness range from 0.003 mil through 0.020 mil, length varies from 11" to 17", and a standard height of 17". This style is normally held in place with tape making them both durable and easy to use.
The "standard" style is usually constructed of a 0.040 ml thick embossed material for the sole and an 0.008 mil thick material for the upper in heights from 8" to 16". Standard style booties are held in place by means of snaps, elastic, rubber bands, or Velcro and similar to their "sock" counterpart, come in a wide variety of colors.
View Standard Style Product Chart
Shoecovers
Our shoecovers are a low-cut design styled especially for protection of the sole, toe, arch, and heal area of normal footwear.
The shoecovers can be constructed of Polyvinyl Chloride (PVC), Polyurethane, and Polyethylene in various material thicknesses and embossings as required. The opening is designed so that the toe of the shoe will slip easily into the shoecover and can be pulled over the back of the heal by using the pull tab.
All of the materials used in the construction of Rich Industries shoecovers are of the finest materials available in lengths ranging from from 11" through 16". Our shoecovers are of the highest quality and will accommodate practically any size shoe.